manualshive.com logo in svg

Kontron MOPS/386A, Руководство пользователя

Поделиться
Скачать
Kontron MOPS/386A Скачать руководство пользователя страница 31

Kontron

 MOPS/386A User’s Guide

25

IDE Interface

13. 

IDE INTERFACE

The MOPS/386A features an IDE controller interface with on-chip decode and select logic

compatible with IBM PC/XT and PC/AT embedded hard-disk drives. The board can support
up to two IDE drives such as hard disks and CD-ROM in a master/slave configuration. If only

one drive is in the system, you must set it as the master.

13.1 

Connector

The IDE interface is available through Connector X5 (44 pins). This interface is designed in

2mm grid for optimal connectivity to a 2.5” hard disk.

There are several accessories available for IDE connectivity.

You can use two cables to directly connect a hard disk in a 2.5” form factor (KAB-IDE-2MM,

Part Number 96021-0000-00-0) or a 3.5” form factor (KAB-IDE-25, Part Number 96020-
0000-00-0).

You can plug a Kontron chipDISK, which is an IDE hard disk that uses Flash technology, into
the IDE interface and mechanically mount it by using a mini spacer on the chipDISK hole.
You also can use a chipDISK adapter (chipDISK-ADA1, Part Number 96004-0000-00-0) or

compact Flash adapter (CFC-ADA1, Part Number 96004-0000-00-2) for more disk support.

Содержание MOPS/386A




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды