KTGM45 Users Guide
KTD-N0793-L
Page 12
I/O Control
Two Winbond W83627DHG LPC Bus I/O Controllers
Peripheral
interfaces
•
Four USB 2.0 ports on I/O area
•
Eight USB 2.0 ports on internal pinrows
•
One IEEE 1394a-2000 (up to 400M bits/s) on I/O area (not available on
KTGM45/mITX Basic)
•
One IEEE 1394a-2000 (up to 400M bits/s) on internal pinrows (not available on
KTGM45/mITX Basic)
•
Four Serial ports (RS232)
•
Four Serial ATA-300 IDE interfaces with RAID 0/1 support
•
One PATA 66/100/133 interface with support for 2 devices
•
CF (Compact Flash) interface (KTGM45/mITX Plus only) supporting CF type I and II
complying with +5V supply and Vih min. 2.0V and Vil max. 0.8V. (UDMA2 max.).
Note that only one PATA device is supported when CF is used and only by use of 40-
wire cable (not 80-wire cable). Optionally use SATA devices.
•
PS/2 keyboard and mouse ports
LAN
Support
•
1x 10/100/1000Mbits/s LAN (ETHER1) using Intel® Boazman-LM WG82567LM
Gigabit PHY connected to ICH9M Integrated GbE MAC supporting AMT 4.0
•
2x 10/100/1000Mbits/s LAN (ETHER2/ETHER3)using Intel® Hartwell 82574L PCI
Express controllers (not available on KTGM45/mITX Basic)
•
PXE Netboot supported.
•
Wake On LAN (WOL) supported (only on ETHER1).
BIOS
•
Kontron Technology / AMI BIOS (core version)
•
Support for Advanced Configuration and Power Interface (ACPI 3.0b), Plug and Play
o
Suspend To Ram
o
Suspend To Disk
o
Intel Speed Step
•
Secure CMOS/ OEM Setup Defaults
•
“Always On” BIOS power setting
•
RAID Support (RAID modes 0 and 1)
Expansion
Capabilities
•
PCI Bus routed to PCI slot(s) (PCI Local Bus Specification Revision 2.3)
o
KTGM45/mITX: 1 slot PCI 2.3, 32 bits, 33 MHz, 5V compliant
o
KTGM45/Flex: 2 slots PCI 2.3, 32 bits, 33 MHz, 5V compliant
o
KTGM45/ATXE: 5 slots PCI 2.3, 32 bits, 33 MHz, 5V compliant
•
PCI-Express bus routed to PCIe (PCI-Express) slot(s) (PCIe 1.1)
o
KTGM45/mITX: 1 slot PCIe x16 (PCIe 2.0)
1 slot miniPCI-Express (PCIe 1.1)
o
KTGM45/Flex: 1 slot PCIe x16 (PCIe 2.0)
1 slot PCIe x1 (x16 connector) (PCIe 1.1)
o
KTGM45/ATXE: 1 slot PCIe x16 (PCIe 2.0)
1 slot PCIe x1 (x16 connector) (PCIe 1.1)
•
SMBus routed to FEATURE, PCI slot, PCI Express
•
LPC Bus routed to TPM connector (not available on KTGM45/mITX)
•
DDC Bus routed to CRT connector
•
8 x GPIOs (General Purpose I/Os) routed to FEATURE connector
Hardware
Monitor
Subsystem
•
Smart Fan control system, support Thermal® and Speed® cruise for three on-board
Fan control connectors: FAN_CPU, FAN_SYS and FEATURE (AUXFAN in BIOS)
•
Three thermal inputs: CPU die temperature, System temperature and External
temperature input routed to FEATURE connector. (Pre/- 3ºC)
•
Voltage monitoring
•
Intrusion (Case Open) detect input
Power
Supply Unit
ATX/BTX (w. ATX+12V) PSU for full PCI/PCIe load.
Alterna12V single supply via ATX+12V (4-pole) connector, but with limitation to
PCI/PCIe load.
Operating
Systems
Support
•
WinXP
•
WinVista
•
Windows 7
•
Linux (limitations may apply)
(Continues)
System
