7. Assembly, Disassembly
KISS 4U KTC5520 – User's Guide (Version 1.01)
To install or remove an expansion card, perform the following steps:
1.
Turn your system off and disconnect it from the AC main power supply.
In order to remove the cover, unscrew the following knurled screws:
the cover fastening screw (Fig. 11, pos. 11 and Fig. 25) on the front side
the knurled screws (Fig. 18, pos. 8 and Fig. 26)on the rear side
2.
Loosen the knurled screws (the cover fastening screw on the front side and the two knurled screws on the rear side)
which secure the cover (see Fig. 25 and Fig. 26) to the chassis.
Fig. 25: Loosening the knurled cover fastening screw on the front side
Fig. 26: Loosening the knurled screw on the rear side
26
www.kontron.com