Kontron ETX -CN8 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 78

background image

1 User Information

Kontron User's Guide ETX®-CN8

6

1

User Information

1.1

About This Document

This document provides information about products from Kontron Embedded Modules GmbH and/or its
subsidiaries. No warranty of suitability, purpose, or fitness is implied. While every attempt has been
made to ensure that the information in this document is accurate, the information contained within is
supplied “as-is” and is subject to change without notice.

For the circuits, descriptions and tables indicated, Kontron assumes no responsibility as far as patents or
other rights of third parties are concerned.

1.2

Copyright Notice

Copyright © 2003-2009 Kontron Embedded Modules GmbH

All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any form or by any means
(electronic, mechanical, photocopying, recording, or otherwise), without the express written permission
of Kontron Embedded Modules GmbH.

DIMM-PC®, PISA®, ETX®, ETXexpress®, microETXexpress™, X-board®, DIMM-IO® and DIMM-BUS® are
trademarks or registered trademarks of Kontron Embedded Modules GmbH. Kontron is trademark or
registered trademark of Kontron AG.

1.3

Trademarks

The following lists the trademarks of components used in this board.

®

IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business
Machines Corp.

®

Microsoft is a registered trademark of Microsoft Corp.

®

Intel is a registered trademark of Intel Corp.

®

All other products and trademarks mentioned in this manual are trademarks of their
respective owners.

1.4

Standards

Kontron Embedded Modules GmbH is certified to ISO 9000 standards.

1.5

Warranty

This Kontron Embedded Modules GmbH product is warranted against defects in material and
workmanship for the warranty period from the date of shipment. During the warranty period, Kontron
Embedded Modules GmbH will at its discretion decide to repair or replace defective products.

Within the warranty period, the repair of products is free of charge as long as warranty conditions are
observed.

«
...
4
5
6
7
8
...
»

Содержание ETX -CN8















































































Отзывы:

Нет отзывов

Похожие инструкции для ETX -CN8

UP Squared 6000 Edge Computing Kit

Бренд: Aaeon Страницы: 59

Бренд: Magma Страницы: 2

Бренд: Harmonic Страницы: 56

Бренд: Acqiris Страницы: 22

Бренд: Alesis Страницы: 46

Urban Wireless CC-VT240W

Бренд: Cateye Страницы: 15

Бренд: Alesis Страницы: 61

Бренд: EVS Страницы: 30

Бренд: SIIG Страницы: 6

Бренд: Longshine Страницы: 27

Easy Tool-ID BSG TID-05-T30-00-005

Бренд: Balluff Страницы: 46

memonizerWORKSTATION

Бренд: MEMON Страницы: 2

Бренд: axing Страницы: 52

Бренд: NCR Страницы: 15

Бренд: COUGAR Страницы: 2

Бренд: Qlogic Страницы: 2

Бренд: DayTronic Страницы: 13

Бренд: Carrier Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды