manualshive.com logo in svg

Kontron ETX CD, Руководство пользователя

Поделиться
Скачать
Kontron ETX CD Скачать руководство пользователя страница 31

 

4 ETX® connectors

 

Kontron User's Guide ETX CD 

31 

 

4.5.2

 

Connector X3 Signal Description 

VGA Output 

LVDS Flat Panel Interface (JILI)  

The user interface for flat panels is the JUMPtec Intelligent LVDS Interface (JILI). The implementation of 
this subsystem complies with the ETX® Specification. Implementation information is provided in the 
ETX® Design Guide. Refer to the documentation for additional information. 

Digital Flat Panel Interface (JIDI) 

The ETX®-CD does not support the JUMPtec Intelligent Digital Interface (JIDI). 

Serial Ports (1 and 2) 

The ETX®-CD supports two serial interfaces (TTL). You can use COM2 for IrDA SIR operation. This feature 
is implemented in the super I/O device, which is a Winbond 83627HF. 

The implementation of the serial interface complies with the ETX® Specification. Implementation 
information is provided in the ETX® Design Guide. Refer to the documentation for additional 
information. 

Configuration: 

The serial-communication interface uses I/O and IRQ resources. The resources are allocated by the BIOS 
during POST configuration and are set to be compatible with common PC/AT settings. Use the BIOS setup 
to change some parameters that relate to the serial-communication interface. 

PS/2 Keyboard 

The implementation of the keyboard interface complies with the ETX® Specification. Implementation 
information is provided in the ETX® Design Guide. Refer to the documentation for additional 
information. 

Configuration: 

The keyboard uses I/O and IRQ resources. The BIOS allocates the resources during POST configuration. 
The resources are set to be compatible with common PC/AT settings. Use the BIOS setup to change some 
keyboard-related parameters. 

PS/2 Mouse 

The implementation of the mouse interface complies with the ETX® Specification. Implementation 
information is provided in the ETX® Design Guide. Refer to the documentation for additional 
information. 

Configuration: 

The mouse uses I/O and IRQ resources. The BIOS allocates the resources during POST configuration. The 
resources are set to be compatible with common PC/AT settings. You can change some mouse-related 
parameters from the BIOS setup. 

Содержание ETX CD




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды