Kontron EPIC/PM, Руководство пользователя

Страница: 36 / 104

11 10BGraphic Interfaces
Kontron User's Guide
EPIC/PM
36
7. If no image appears on your display, connect a CRT monitor to the CRT connector.
8. If necessary program the EEPROM on the JILI cable with the matching configuration
data.
9. If you still do not see improvement, consider contacting the dealer for technical
support.
11.7 Configuration
You can set the general configuration for the graphic controller in the BIOS setup utility. Refer to the
Advanced Chipset Control submenu and the Display Control submenu in the
Appendix B: BIOS Operation
chapter for more configuration information.
You can download drivers for the graphics controller from the Kontron Web site. For further information,
read the read-me or help files or contact technical support.
11.8
11.9
Graphics Technical Support
If problems occur, you can solve some of them by using the latest drivers for the graphics controller.
Kontron provides you with the latest tested drivers, which can differ from newer ones. For further
technical support, contact either Kontron, or obtain support information and downloadable software
updates from Intel®.
Available Video Modes
The following list shows the video modes supported by the graphics controller with maximum frame
buffer size. When configured for smaller frame buffers and/or using a LCD panel on the JILI interface,
not all of the video modes listed below may be available. Capability depends on system configuration
and on display capabilities. Different operating systems also may not support all listed modes by the
available drivers.
11.9.1 Standard IBM-Compatible VGA Modes
Video Mode Type Characters/Pixels Colors/Gray val.
00h/01h Text 40x25 16
02h/03h Text 80x25 16
04h/05h Graphics 320x200 4
06h Graphics 640x200 2
0Dh Graphics 320x200 16
0Eh Graphics 640x200 16
0Fh Graphics 640x350 Mono
10h Graphics 640x350 16
11h Graphics 640x480 2
12h Graphics 640x480 16
13h Graphics 320x200 256