Kontron coolMONSTER/S, Руководство пользователя

Страница: 29 / 89

KONTRON
coolMONSTER/S User’s Guide 23 Graphics Interface
13.
GRAPHICS INTERFACE
The onboard CT69000 LCD-VGA-Controller from Asiliant drives two interfaces on the
cool MONSTER/S
.
 Cathode Ray Tube (CRT) Interface
 Digital Panel Interface (JIPA)
To find the location of the Interfaces, please see the Appendix E: Connector Layout chapter.
13.1
CRT Connector
The CRT (Cathode Ray Tube) interface is available through Connector X21 (15 pins).
Header Pin Signal Name Function
1 RED Red Video
2 GRN Green Video
3 BLU Blue Video
4 NC (**) For internal use only
5 GND Ground
6 GND Ground
7 GND Ground
8 GND Ground
9 NC (**) For internal use only
10 GND Ground
11 NC (**) For internal use only
12 DDA DDC Serial Data Line
13 HSYNC Horizontal Sync
14 VSYNC Vertical Sync
15 DCK DDC Data Clock Line
NOTE: (**) Do not connect anything to these pins!
13.2
Digital Panel Interface (JIPA) Connector
The JUMPtec Intelligent Panel Adaption (JIPA) Interface is KONTRON’s standard flat panel interface
for digital LCD graphics. The implementation of this subsystem complies with the JIPA
Specification, which you can find on the KONTRON Web site.
The digital panel interface connector is available through Connector X23 (72 pins).
StockCheck.com