62
2.
Unfasten the plastic protective cover from the flex circuit cable. (Figure 55, “A”,
“B”, and “C”
Figure 55. Removing the Flex Circuit Cable Cover
3.
Disconnect the flex cable from the SAS/SATA module. (Figure 56, “A” and “B”)
Figure 56. Disconnecting the Flex Circuit Cable
Removing the Guide Bracket and Releasing the Bridge Board
1.
Disconnect the serial port cable from the bridge board.
2.
Remove the black plastic riser card assembly baffle/bridge board guide bracket by
loosening the two screws that secure it to the chassis base. (Figure 57, “A” and
“B”)
Figure 57. Removing the Guide Bracket from the Bridge Board
