43
Figure 31. Installing the SAS/SATA Control Module in the Bracket
5.
Line the SAS/SATA control module and bracket up close to the SAS/SATA backplane
board and insert the SAS/SATA control module card edge into the edge connector on
the backplane board. (Figure 32, “A” and “B”)
Figure 32 Installing the SAS/SATA Control Module
6.
Fasten the bracket to the SAS/SATA backplane hold-down plate with one screw. (“C”)
7.
Attach the flex circuit cable (Figure 33, “A”) to the connector on the SAS/SATA
control module (“B”).