manualshive.com logo in svg

Kontron AT8402, Руководство пользователя

Поделиться
Скачать
Kontron AT8402 Скачать руководство пользователя страница 10

AT8402

Preface

Page x

AT8402 User Guide

Proprietary Note

This document contains information proprietary to Kontron AG. It may not be copied or trans-
mitted by any means, disclosed to others, or stored in any retrieval system or media without
the prior written consent of Kontron AG

 

or one of its authorized agents.

The information contained in this document is, to the best of our knowledge, entirely correct.
However, Kontron AG cannot accept liability for any inaccuracies or the consequences thereof,
or for any liability arising from the use or application of any circuit, product, or example shown
in this document.

Kontron AG reserves the right to change, modify, or improve this document or the product de-
scribed herein, as seen fit by Kontron AG without further notice.

Trademarks

Kontron AG and the 

Kontron

 logo are trade marks owned by Kontron AG, Germany. In addition,

this document may include names, company logos and trademarks, which are registered trade-
marks and, therefore, proprietary to their respective owners.

Environmental Protection Statement

This product has been manufactured to satisfy environmental protection requirements where
possible. Many of the components used (structural parts, printed circuit boards, connectors,
batteries, etc.) are capable of being recycled.

Final disposition of this product after its service life must be accomplished in accordance with
applicable country, state, or local laws or regulations.

Explanation of Symbols

CE Conformity

This symbol indicates that the product described in this manual is in compli-
ance with all applied CE standards. Please refer also to the section “Applied
Standards” in this manual.

Caution, Electric Shock!

This symbol and title warn of hazards due to electrical shocks (> 60V) when
touching products or parts of them. Failure to observe the precautions indi-
cated and/or prescribed by the law may endanger your life/health and/or
result in damage to your material.
Please refer also to the section “High Voltage Safety Instructions” on the fol-
lowing page.

Содержание AT8402


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды