Kontron AdvancedTCA AM4330, Руководство пользователя

Страница: 19 / 31

Board Features
8 AM4330 User's Guide
X Exceed critical threshold
* Power On/Off
- Power On
N No change
2.4.2.1 IPMB-L Link Sensor
The AM4330 has an IPMB-L links to communicate with the AMC Carrier and other chassis devices on
the chassis IPMB-0 bus. MMC monitors the bus for any link failure and send the bus failure event to
the AMC Carrier upon the recovery occurs.
2.4.2.2 Module Hot Swap
The hot-swap event message conveys the current state of the module, the previous state, and a
cause of the state change as can be determined by the MMC. Refer to AMC.0 R2.0 Specifications for
further details on the module hot-swap state.
2.4.3 Field Replaceable Unit (FRU) Information
The FRU Information provides inventory data about the boards where the FRU Information Device is
located. The part number or version number can be read through software.
Board 3.3VSUS 3.3 V Suspend * X
Board 12.0V 12.0 V - X
VCC Bleu LED 5.0 V * X
Board 2.5V 2.5 V - X
Board V1.5V 1.5 V - X
Board 1.0V 1.0 V - X
Temp AirInlet Board Inlet Temperature - X
Temp 8155 Temperature 8155 * X
Temp PEX Temperature 8114 * X
Temp Exhaust Board Outlet Temperature * X
PexLaneGood 0 PCIE lane 0 detection - N
PexLaneGood 1 PCIE lane 1 detection - N
PexLaneGood 2 PCIE lane 2 detection - N
PexLaneGood 3 PCIE lane 3 detection - N
Health Error Board health sensors (aggregation of other sensors) *
Asserted /
Desserted
IPMC Reboot IPMC reboot detection * N
Ver change IPMC firmware upgrade detection * N
Sensor Name Voltage/Signals Monitored Scanning Enabled
under Power
State Health LED
(Green to Red)