Kontron 104-AD128, Руководство пользователя

Страница: 32 / 57

System Installation 3-5 104-ADIO128 (AD128) User’s Guide
Inst
allat
io
n
ä
ä ä
ä
System Installation
Before installing the 104-ADIO128 (AD128) board, carefully read Chapter 2 of this manual and
configure the board according to your requirements. The SETUP program on the I/O and
Communication “A” Series Software CD can be used to assist in configuring jumpers and switches
on the card.
ä ä ä ä
Installing the Board
1) Turn off PC power. Disconnect the power source.
2) Gently insert the 104-ADIO128 (AD128) connector noting proper key orientation of the
expansion connector on a PC/104 compatible card. The 104-ADIO128 (AD128) adapter
is keyed per the PC/104 Revision 2.1 Specification. This will aid in preventing the
adapter from being inserted incorrectly.
3) Mounting hardware (nylon stand-offs and screws) is provided to insure a good
mechanical connection. Retain any mounting hardware not used to allow for future
expansion.
4) The cables provided are keyed and can be installed to the board’s connectors before or
after the adapter is inserted in the stack.
5) Connect the power source.
6) Installation is complete.
CAUTION
Extreme care should be taken when installing the 104-ADIO128
(AD128)
to avoid causing damage to the connectors.