Maintenance and Prevention
V Panel Express – User’s Manual
33
Maintenance and Prevention
Kontron Embedded Computers systems require minimal maintenance and care to
keep them operating correctly.
Occasionally wipe the system with a soft dry cloth.
You should only remove persistent dirt by use of a soft, slightly damp cloth
(use only a mild detergent).
Do not use abrasives, abrasion sponges, steel wool, metal threads,
or solvent like alcohol, acetone, or gasoline to clean the display’s
protection pane or the touch screen surface.
Replacing the Lithium Battery
The baseboard is equipped with a lithium battery. To replace this battery, please
proceed as follows:
1.
Open the unit as
described in the “Installing/Removing the Expansion Cards”
chapter (steps 1-3).
2.
If your system is equipped with expansion cards, please remove them first as
described in the “Installing/Removing the Expansion Cards” chapter
(steps 5-6).
3.
Remove the battery by pressing outwards the ejector spring.
4.
Insert the new battery into the socket.
5.
Make sure that you insert the battery correctly. The plus pole must be on top!
6.
Reinstall the removed expansion cards and reconnect the removed data cable.
7.
Close the Unit as described in chapter “Installing/Removing the Expansion
Cards” (step 8).
The lithium battery must be replaced with an identical battery or a battery type
recommended by Kontron Embedded Computers (Lithium battery 3.0 V for RTC,
type: CR2032).
Do not dispose of lithium batteries in domestic waste. Dispose of
the battery according to the local regulations dealing with the
disposal of these special materials (e.g. to the collecting points for
the disposal of batteries).
StockCheck.com
