Kontron Embedded Computers PCI - 960 Скачать руководство пользователя страница 51

Страница: 51 / 86

11. AMI BIOS Configuration

PCI-960 – User’s Manual (V1.02)

11.3.2.12.

S.M.A.R.T.

S. M. A. R. T. (Self-Monitoring, Analysis and Reporting Technology) is used to predict drive failures. (The integrated

drive has to support this feature).

Available Settings are:

Auto

, Disabled and Enabled.

11.3.2.13.

32Bit Data Transfer

This option allows you to enable or disable the 32bit data transfer rate for the IDE devices. If this option is “Enabled” the

date transfer is accelerated and the CPU (PCI Bus) is relieved.

Available settings are:

Enabled

and Disabled.

11.3.3.

Floppy Configuration

11.3.3.1.

Floppy A / B

These options select the type of the floppy drive (for drive A or drive B). Possible settings are: Disabled, 720 KB 3½“,

1.44 MB

3½" and 2.88 MB 3½“.

Disabled

Set this value to prevent the use of the selected floppy disk drive channel. This option should be set if

no floppy disk drive is installed on the specified channel. This is the default setting for

Floppy

Drive B

360KB

5¼“

Set this value if the floppy disk drive attached to the corresponding channel is a 360 KB 5¼“ floppy

disk drive.

1.2MB

5¼“

Set this value if the floppy disk drive attached to the corresponding channel is an 1.2 MB 5¼“ floppy

disk drive.

720KB

3½“

Set this value if the floppy disk drive attached to the corresponding channel is a 720 KB 3½“ floppy

disk drive.

1.44MB

3½“ Set this value if the floppy disk drive attached to the corresponding channel is an 1.44 MB 3½“ floppy

disk drive.

This is the default setting for

Floppy Drive A

2.88 MB

3½“ Set this value if the floppy disk drive attached to the corresponding channel is a 2.88 MB 3½“ floppy

disk drive.

Содержание PCI - 960























































































Результаты поиска

Содержание PCI - 960

Отзывы:

Похожие инструкции для PCI - 960

Бренды по названию

Популярные бренды

Kontron Embedded Computers PCI - 960, Руководство пользователя

Результаты поиска

Содержание PCI - 960

Отзывы:

Похожие инструкции для PCI - 960

Бренды по названию

Популярные бренды