Kontron Embedded Computers PCI-760 Скачать руководство пользователя страница 54

Страница: 54 / 84

10. AMI BIOS Configuration

PCI-760 – User’s Manual (V1.00)

USB Mass Storage Device Configuration

This option is only available if USB storage devices are connected to the board.

10.3.5.5.

USB Mass Storage Reset Delay

This option specifies amount of time the BIOS USB code should wait after issuing a reset to the USB mass storage

devices (only needed for slow starting devices).

It is possible to choose between: 10 Sec,

20 Sec

, 30 Sec,

and 40 Sec.

10.3.5.6.

Emulation Type

This option specifies the type of emulation provided by the BIOS for the device.

It is possible to choose between:

Auto

, Hard Disk, CD-ROM, Floppy

and Forced FDD.

Auto

When this option is selected the BIOS detects the current formatted media.

Hard Disk

This option allows the device to be emulated as hard disk.

CD-ROM

This option allows the device to be emulated as a CD-ROM (if the block size of the media is greater

than 512 bytes).

Floppy

This option allows the device to be emulated as floppy drive.

Forced FDD

This option allows a hard disk image to be connected as a floppy image.

Содержание PCI-760





















































































Результаты поиска

Содержание PCI-760

Отзывы:

Kontron Embedded Computers PCI-760, Руководство пользователя, Страница: 54 / 84

Результаты поиска

Содержание PCI-760

Отзывы: