7
Note: The tee adapter is not needed when using a mask.
4) Check that the POWER switch is in the “off” position. Plug the power cord
into a main outlet.
5) Press the POWER switch to the “ ON” position.
6) Start your treatment according to your physician’s or therapist’s
instructions.
7) Once the treatment is complete, press the POWER switch to the “off”
position and unplug the power cord from the outlet.
IMPORTANT!
The Compressor will automatically shut off if it becomes overheated. If/When
this happens, immediately:
1) Press the POWER switch to the “ off” position.
2) Unplug the power cord from the outlet.
3) Allow the motor to cool for 30 minutes.
Before restarting the unit, make sure that the air vents are not obstructed.
After Every Use
1) Unplug the unit from the power source.
2) Allow the unit to completely cool.
3) Carefully detach the air tubing from the Nebulizer and pour out any
remaining medication.
4) Follow the cleaning procedures provided in this manual.
Trouble Shooting
If any abnormality occurs during use, please check and correct the following:
Condition
Correction
Remarks
Unit does not
operate when
POWER
switch is
pressed.
Check the AC connection to the outlet