background image

Operating this Log Splitter safely is necessary to prevent 

or minimize the risk of death or serious injury. Unsafe 

operation can create a number of hazards for you.

WARNING!

Always follow these precautions:
• Never open the switch box or motor cover.  Never 

attempt any electrical repairs yourself.  If in doubt, 

consult a qualified electrician, or contact your local 

dealer for help or informations.
• Never use an extension cord that is not rated for 

outdoor use.
• Never operate the Log Splitter if there is an elec-

trical hazard present.
• Never operate the Log Splitter in wet conditions 

and always store under cover.
• Never operate the Log Splitter with a damaged 

electrical cord or damaged extension cord.
• Never pull on the electrical cord to move the ma-

chine.
• Always grasp the electrical cord plug when un-

plugging the cord from the outlet; never pull the 

plug out by the cord.  Make sure your fingers do 

not touch the metal prongs when plugging or un-

plugging.

• Never operate the Log Splitter unless the electri-

cal cord is plug
• If you are using an extension cord, keep the con-

nection between the electrical cord and the exten-

sion cord well away from any water.
• Never use an extension cord longer than 10 feet 

and smaller than 1.5 mm2 or 20 feet and smaller 

than 2.5 mm2 in diameter, the cord will produce 

a voltage drop that will prevent the motor from 

supplying full power and may cause damage to the 

motor. Use of a smaller diameter extension cord 

could result in melting of the insulation or even 

create a fire.

• Always keep the electrical cord and/or extension 

cord away from excessive heat, oil, and sharp ob-

jects.

Always take the following precautions when operat-

ing this Log Splitter:
• The machine is designed to split logs. Do not use 

it for any other purpose.
• Never operate your unit on a slippery, wet, mud-

dy, or icy surface. 
• Exercise caution to avoid slipping or falling.
• Never, under any conditions, remove, bend, cut, 

fit, weld, or otherwise alter standard parts on the 

Log Splitter.  This includes all shields and guards. 

Modifications to your machine could cause person

-

al injuries and property damage and will void your 

warranty.
• Allow only one person to operate the Log Splitter 

at any time. This includes placing the log on the 

beam.
• If the machine should start making an unusual 

noise or vibration, shut off the Motor, Unplug the 

Power Cord, wait five minutes for machine to cool 

down then inspect for damage.  Vibration is gener-

ally a warning of trouble. Check for damaged parts 

and clean, repair and replace as necessary.

• Never tamper with safety devices.  Check their 

proper operation regularly.
• Before performing any maintenance or inspection 

procedure on the Log Splitter, shut off the Motor, 

unplug the Power Cord and wait five minutes for 

machine to cool down.
• Never allow people who are unfamiliar with these 

instructions to use the Log Splitter. 
• Never overload or attempt to split logs beyond 

the recommendations listed in this manual. 

• Never operate the machine when under the influ

-

ence of alcohol, drugs, or medication.
• Use the machine only in daylight.
• Keep all nuts and bolts tight and keep the equip-

ment in good operating condition.

SAFETY WITH ELECTRIC - POWERED MACHINES 

1.2

Never overlook the hazards of electricity.  

WARNING!

www.ks-power.de/en

   

|

    2

Содержание KS 7THE 52/30












Отзывы: