Könner & Söhnen KS 7HP-1050G, Руководство пользователя

Страница: 30 / 39

29
Caution! Don’t use reverse mode for ground tilling!
! !
ATTENTION - DANGEROUS!
Fig. 21
Starting
grip
To eliminate the engine turn the switch to O (Off) position (Fig. 20).
FORWARD MOVEMENT
REVERSE MOVEMENT
STOPPING THE ENGINE
NEXT STEPS
Gradually increase the depth of plowing when tilling the solid ground. Press on
the steering wheel to facilitate turning of the machine, transfer the weight of
blade back when turning on the soil blade. To adjust the forward speed, press the
left handle grip. To move backwards which facilitates the work with the tiller, use
the right handle grip (Fig. 24) Lower the front wheel for device transportation.
After work or during a break at work, release the clutch and turn off the engine.
Cultivator models are equipped with a reverse function for better maneuvering
(except for model KS 7HP-850A).
In order for the cutters or wheels to start reverse rotation, set the gearshift lever
to the “-1” position (R) and then press and hold down the clutch lever.
6 ~ 8
0
Сlutch lever
PRESSED
RELEASED
Fig. 22
Fig. 24 Fig. 24
1. Set the gearshift lever to the “+1”
or “+2” or “+3”) position.
2. Gently press the red fuse (near the clutch
lever), press and hold down the clutch lever.
(see Fig. 22) (for model KS 7HP-1050G, see
Fig. 3 on Section 7).