Könner & Söhnen KS 600RTG, Руководство пользователя

Страница: 7 / 31

OPERETOR’S PANEL OPERETOR’S PANEL
KS 7HP-850А KS 7HP-850А – first attach the operator’s panel to the steering column using the fixing bolts, then attach
the engine speed control ( see picture 24 in the Appendix).
TRANSMISSION COVER
TRANSMISSION COVER
Attach the transmission cover to the tiller by inserting the fasteners into the corresponding holes (see pic-
tures 29-31 in the Appendix).
When attaching the blades, always pay attention to the position of the cutting edge of the blades. It should
face the direction of travel of the tiller. Cutters are secured with bolts. The disk is connected to the main
structure using a bolt.
KS 7HP-850A, KS 7HP-1000G KS 7HP-850A, KS 7HP-1000G – see pictures 14-17 in the Appendix.
KS 7HP-950A KS 7HP-950A – see picture 25 in the Appendix.
KS 7HP-850A KS 7HP-850A – see picture 29 in the Appendix.
KS 7HP-950A KS 7HP-950A – see picture 30 in the Appendix.
KS 7HP-950S KS 7HP-950S – see picture 31 in the Appendix.
KS 7HP-950S, KS 7HP-1050G, KS 9HP-1350G-3 KS 7HP-950S, KS 7HP-1050G, KS 9HP-1350G-3 – attach the operator’s panel to the steering column
using the fixing bolt ( see pictures 26-28 in the Appendix).
KS 7HP-950S KS 7HP-950S – see picture 22 and picture 23 in the Appendix.
KS 7HP-1050G, KS 9HP-1350G-3 KS 7HP-1050G, KS 9HP-1350G-3 – see picture 21 in the Appendix.
1 = 24
8 = 12
2 = 24
9 = 2
3 = 24
10 = 2
4 = 24 5 = 4 6 = 4 7 = 12 Series No. = pcs
1 = 24
8 = 2
2 = 24
9 = 2
3 = 24
10 = 16
4 = 4
11 = 16
5 = 4 6 = 2 7 = 2 Series No. = pcs
FENDERS
FENDERS
Attach the fenders to the tiller frame by inserting the fasteners into the corresponding holes (see pictures
32-34 in the Appendix).
KS 7HP-850A KS 7HP-850A – see picture 32 in the Appendix.
KS 7HP-950A, KS 7HP-950A, KS 7HP-950S KS 7HP-950S – see picture 33 in the Appendix.
KS 7HP-1050G, KS 9HP-1350G-3 KS 7HP-1050G, KS 9HP-1350G-3 – see picture 34 in the Appendix.
3. For models KS 7HP-1000G, KS 7HP-950A, KS 7HP-950S, KS 7HP-1050G cutters are assembled in four
sections with four blades each, for model KS 600RTG cutters are assembled in three sections with two
blades each.
KS 7HP-950A KS 7HP-950A – see pictures 18-20 in the Appendix.
KS 600RTG KS 600RTG – The cutting edge of the blade should rotate in the
direction of power, secure the cutters with a 8 × 50 shaft pin and
an R pin;
KS 600RTG
1 = 24
8 = 2
2 = 24
9 = 2
3 = 24
10 = 16
4 = 4
11 = 16
5 = 4 6 = 2 7 = 2 Series No. = pcs
konner-sohnen.com
| 6