25-Jun-21
page 2 of 3
VISUAL ALERT SETUP GUIDE
SETUP THE TRANSMITTER
The CA-BX Transmitter must be placed onto the Videophone rear kickstand, adjacent to the optional External Speaker, so
that the Transmitter Microphone is right next to the External Speaker. We accomplish this using Velcro Tape, so that the
Transmitter can be removed in the future, for battery replacement.
Turn on the Transmitter
•
Set the SENSITIVITY button on the side, labeled "Sen", to position
2
.
Position the Transmitter
•
Mount the Speaker Bar onto the kickstand, as detailed in the External Speaker Bar Guide.
•
Stick the large piece of Velcro onto the Videophone, just above the kickstand, ie. covering the MSi logo.
•
The Transmitter already has thin strips of Velcro on it, so it will stick to the large piece of Velcro . Place the
Transmitter EXACTLY as shown:
o
with the Green Button facing outwards
o
with the "Sen" selector switch facing upwards
The above describes installation of the Transmitter onto a Videophone that is on a desk or table, using the rear
kickstand. If your Videophone is mounted onto a bracket, please contact Konnekt. Depending on your particular
installation, you will need to find a way to position the Transmitter close to the External Speaker, perhaps using Velcro,
or cable ties or similar.