Konig SEC-DVR304, Руководство пользователя

Страница: 11 / 141

Standalone DVR SEC-DVR304 User Manual
11
(ALARM IN 1-4) sensors or door switches.
10 Alarm Output Connectors
(ALARM OUT NC(1)/NO(2))
Connect NC connectors (left) to Normally Closed (NC)
alarm output, or NO connectors (right) to Normally Open
(NO) alarm output. Please note that only one of the NC or
NO connectors can be connected only.
11 Ethernet Connector Connect this unit to a 10/100Base-T Ethernet network
through this port.
12 USB Mouse Connector Connect to USB1.1 mouse before the DVR is power on.
13 Power Cord Inlet (DC 12V) Connect to DC 12V power source.
14 Power Switch (POWER) Turn the power of this unit on/off.
4.3 Remote controller
Name Description
1 REC Press to start the recording.
2
Mode Press to switch between live and playback mode.
At playing, this button is used as “slow backward”.
3
SEQ Press to turn on the sequence mode. At playing,
this button is used as “slow forward”.
4
CALL Press this button to switch to or return from full
screen display of the focus camera in main screen
display. In some dialogs, this button is used as a
miscellaneous function key.
5
Search Click to search recorded data while in the playback
mode. There are five types of search modes: search
by time, search by event, smart search, search
archived files and POS search.
(Please refer to Chapter 10 Search & Playback for detail
information.)
6 Alarm Reset Press to restore the alarm status to default.
7
Numeric/
alpha button
(1-9, 0, *, #)
Press these buttons for camera selection in most of
the circumstances. Use these buttons to enter texts
and numerical values. ’#’ is also used for page
down in multi-split-window displays.
PTZ Click to access the PTZ control when there is a PTZ
camera supported.
8
Goto Click to view the image taken by PTZ camera at its
preset location.