Konig SEC-CON22, Руководство пользователя, Страница: 10 / 18

10
If the NO you input is beyond the range1~64, it will display Error as picture
（
4.1.1-6
）
.
Picture 4.1.1-6
5
、
Press
【
PREV
】
or use the shake toward to LEFT to back to previous menu.
Warning:
：
4.1.2 Keyboard Baud Rate Setting
Enter the main menu as the TFT picture (4.1.1-1) show..
Press
【
1
】
will show on the TFT as picture
（
4.1.1-2
）
Press
【
2
】
select the Baud Rate setting, as Picture(4.1.2-1)
Picture 4.1.2-1
2400bps\4800bps\9600bps\19200bps is available(commonly under the IR emission mode, baud rate is 2400bps or
4800bps)
，
You can select the Baud rate you need and press the
【
ENTER
】
to save. If you operate success, the
screen will show
“
Success
”
.
Press
【
PREV
】
or move the joystick to LEFT to back to previous menu.
Warning
：
4.1.3. Joystick calibrate
When the joystick at midpoint position ,pls enter the menu to enter the “ joystick calibrate.” Item
When calibrating, the joystick must be in a natural state.
Enter the main menu
LCD will display (picture4.1.1-1)
2
、
Press
【
1
】
to select the keyboard setting as LCD(Picture4.1.1-2)
3. 2.Press
【
3
】
into joystick calibrate as LCD(Picture4.1.3-1)
Picture4.1.3-1
Press
【
Enter
】
and the joystick calibrate is finished as LCD display (Picture4.1.3-2)
Error
2. Set Baud rate: 2400bps (4800bps/9600bps/19200bps)
The camera ID default is 1. only one keyboard in a system, it must set to ID as “1”.
Several keyboards work together at most is 4 keyboards, and it must has one keyboard
ID is ID1, otherwise all the keyboard can not work. And the LCD will show as picture
(4.1.1-1)
If connect to the matrix, baud rate must be 9600bps. Several keyboards work together, it must use
9600bps or
19200bps
Joystick is free
then press Enter