4
SET 3S
1S
Press any key to stop search if your device reacts,
then test the key functions.
Set-up by Enter Code
1. Switch on the device, which you would like to control (e.g. TV set).
2. In the back section of this manual, find the brand name and code number of
your device brand (e.g.
Lifetec 003, 010, 062
).
3. Press the
SET
key on your new remote control for more than 3 seconds,
then release it.
4. Press the ▲ or ▼ keys to select to
CODE SETUP
in the LCD menu, and
press the
OK
key.
5. The screen shows the
DEV SEARCH
in the LCD menu, press the ▲ or ▼
keys to select to
CODE SETUP
in the LCD menu, and press the
OK
key.
6. Then you press device key to select your desired operation device(e.g. TV)
and then press the
OK
key, you must now enter the
3-digit device code
(e.g.
003
for Lifetec TV)
7. Press the
OK
key to save it and LCD shows
SUCCESS
, and press
EXIT
key
two times to exit the SETUP mode.
8. You check the function of the keys on the remote control. If most keys on
your new remote control do not function correctly, try another 3-digit device
code (e.g.
010…
) from the list under the same brand. Repeat steps 3 to 7
until all the basic functions operate correctly.
SET 3S
1S
Press code number. (e.g. 003)
Learning
Learn a Command
1. Press a device key (e.g.
TV
) where you want to learn to.
2. Press and hold the
SET
key for more than 3 seconds, then release it.
3. Scroll ▲ or ▼ key to
LEARNING
in the LCD menu, then press the
OK
key.
