4
GENERAL OPERATION
1.
Select the source by setting the
FUNCTION SELECTOR
to
CD
,
OFF
or
RADIO.
2.
Set the desired volume level using the
VOLUME KNOB.
3.
To turn off the unit, set the
FUNCTION SELECTOR
to
OFF.
RADIO RECEPTION
1. Set
the
FUNCTION SELECTOR
to
RADIO.
2. Position
the
BAND SELECTOR
on the desired band: AM, FM or FM ST.
3. Turn
the
TUNING CONTROL
to search for the desired station.
NOTE: The FM stereo indicator comes on if the
BAND SELECTOR
is set on FM stereo and you
have tuned the radio to an FM stereo station.
4. Adjust
VOLUME CONTROL
for the desired volume level.
5.
When you have finished listening to the radio, position the
FUNCTION SELECTOR
to
OFF
to turn
the radio/CD player off.
Helpful hints:
To improve radio reception
•
To listen to the FM radio, extend the telescopic antenna and position it for optimum reception.
Reduce the length of the antenna if the signal is too strong (for example, if you are very near to a
transmitter).
•
As the unit is equipped with a built-in antenna, the telescopic antenna does not have to be used to
listen to AM stations. Move the entire unit to position the built-in antenna.
STEREO HEADPHONE JACK
Plug stereo headphones (not included), equipped with a 3.5mm mini-plug, into the
PHONES
jack for
private listening, without disturbing people around you.
Reduce the
VOLUME
to a low level before putting the headphones on. You can then adjust the
VOLUME
progressively to a comfortable level.
CD PLAYBACK
The CD player supports audio discs, CD-R and CD-RW. Do not attempt to use CD-ROM, CDi, VCDs,
DVDs or data CDs.
Note: Even if this portable radio/CD player is able to read CD-R and CD-RW discs, in addition to
conventional compact discs, it is not possible to offer a 100% guarantee that all CD-R/RW discs can be
read; playback depends on the quality and condition of the blank discs that you use. A playback failure
does not necessarily indicate that the radio/CD player is malfunctioning.
1. Position
the
FUNCTION SELECTOR
on
CD
(the display unit briefly displays - - -)
2.
To open the CD player door, raise it by the corner marked OPEN/CLOSE
3.
Insert a CD, CD-R or CD-RW disc, printed surface facing upwards, and gently press the CD player
door to close it
4.
Start playback by pressing
PLAY/PAUSE
5. Press
PLAY/PAUSE
to interrupt or resume playback
6.
To stop CD playback, press
STOP
NOTE: CD playback stops automatically when the CD compartment is opened, the radio function
is selected or the CD is finished.
SELECTING A DIFFERENT TRACK
During playback, press
NEXT
or
BACK
on the radio/CD player or remote control to select a track.
If you have selected a track number in Stop or Pause mode, press
PLAY/PAUSE
to resume playback.
Briefly press
NEXT
to move to the next track or press
NEXT
several times until the desired track
number appears in the display.
Briefly press
BACK
to return to the start of the current track.
Press
BACK
several times to find a previous track.
