Konig + Neurath Basic 4 Desk, Руководство по сборке

Страница: 24 / 35

21
(c)
(d)
(a)
(e)
Distance 5 mm
(a)
(d)
(c)
50
(b)
50
(b)
6. Fitting the printer
tray
Fit tubes (a) to the printer shelf
from beneath with screws
ø6,3x12, make sure that the
distance between shelf and
tubes is 5 mm.
Note dimension of the pins
(b) = 50 mm.
Push the pins of the printer
tray (c) into the appropriate
openings on the cross
- beam
from underneath and screw
into place from inside using
button head screws (d) M6x16
(SW4).
Optional: fit support leg (e) to
the printer shelf from beneath
with chip
- board screws ø5x15.
5. Fitting the CPU hol-
der
Fit plate to the tubes (a)
with counter - sunk screws
M5x40 (SW3) and spacers.
Note dimension of the pins
(b) = 50 mm.
Push the pins of the CPU
holder (c) into the appropriate
openings on the cross
- beam
from underneath and screw
into place from inside using
button head screws (d) M6x16
(SW4).
The CPU holder can optionally
be mounted on the inside or
the outside.
Desks with fold - out cable tray:
only on the outside!