KONIG+NEURATH TABLE.T, Руководство по сборке

Страница: 40 / 55

14.
Fitting the modes -
ty panel
Remove end caps (a).
Insert the threaded plate (b)
into the bracket.
Mount the rear panel retainer
(c) from beneath using cylin
-
der head screws M6x16
(SW5) through the bracket,
connecting it to the threaded
plate on the inside.
Attach the modesty panel
(d) to the rear panel retainer
using pan
- head screws
M6x8 (SW4).
Replace end caps (e).
37
(c)
(d)
(e)
(e)
(d)
(c)
(a)
(b)
15.
Fitting the return
desk
Remove bracket (a), if pre -
sent.
Align the return desk leg
frame (b) with the desk frame.
Connect it through the main
beam of the desk frame using
cylinder head screws (c)
M6x55 (SW5) and washers
with hex nuts M6 (d).
Position return desk top onto
frame and fix it with flat
-
head
screws (not illustrated).
(a)
(b)