KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
18876-000-55 Rev.1 03-80-887-00 11/14
TECHNICAL DATA
Material
Tray: Aluminum, powder coating black
Edge protectors: exterior plastic, black
interior metal clamp fitting
Rubber knobs: Plastic, PU black
Dimensions
Support: W x D x H 640 x 63 x 325 mm
Packaging
Box: 745 x 115 x 335 mm
Weight
0.96 kg
SETUP INSTRUCTIONS
MAINTENANCE, CLEANING
18876 Master Keyboard
Tray
- perfect fit for the 18860 »Spider Pro« support arms
- stable aluminum tray
- equipped with a keyboard stop
- side keyboard stops ensure that the tray is secure
- with integrated carrying handle and cable guide
- with edge protectors
SAFETY NOTES
Thank you for choosing this product. The instructions
provide directions to all of the important set up and handling steps.
We recommend you keep these instructions for future reference.
Assembly of the TRAY is very simple.
1
.a
Setup »Spider Pro« 18860:
1.a
Place the support arms at the desired height and...
1.b
...secure it with the clamp screw.
2
.a
Insert the arms as far as they will go and...
2.a
...secure this position by placing the pins into the drill
2.a
holes located closest to the stand tube.
3
.a
Place the tray onto the support arms.
3.a
ENSURE: that side brackets face downwards and...
3.a
...cover both support arms.
4
Adhere the rubber knobs (4 knobs) to the proper positions
4
on the tray to create a non-slip surface, if needed.
USAGE NOTES
Adjusting the Height
The tray is suitable for all
support arm adjustment heights.
Should the height of the support arms
need to be adjusted, then remove the
the tray from the support arms,
make the height adjustments,
once the adjustment have been made
place the tray onto the support arms.
- Not suited for »Spider« models 18840 and 18850
- The tray is not affixed to the support arms, rather it is placed
-
on top of the support arms. "Bumping" into the tray from below
-
should be avoided, this can result in the tray slipping and
-
damage to the equipment on the tray.
- Please ensure that the tray is placed on the support arms
-
properly and centered.
- In the event the product is damaged discontinue use.
- to care for the product use a damp cloth
-
and a non-abrasive cleaning agent
FAULT-FINDING (F) and REPAIR (R)
F: Tray is not stable
F:
R: Check to ensure that it is level i.e. balanced
F:
R: The support arms must be parallel to each other.
F: R:
After placing equipment onto the tray, the weight of
F: R:
the tray will also correct any minor imbalances.
F: Keyboard is not stable
F:
R: Check the position of the rubber knobs.
