USAGE NOTES / FUNCTIONS
CHECK, MAINTENANCE, CLEANING
In the event of workstation maintenance pay attention to possible risks
(the stand is bumped into, pinching/ wedging). To care for the product
use a damp cloth and a non-abrasive cleaning agent.
FAULT FINDING (F) & REMEDY (R)
F: Stand is not stable:
F:
B: Adjust balance end caps, check surface.
F: Height/width of the stand does not fit:
F:
B: Select a different mesh teeth position.
F: Stage piano is not firmly placed on the stand (unstable):
F:
B: Check the bottom of the stage piano for uneven surfaces.
F:
B: Adjust the width of the stand.
F: The stage piano is not placed on the rubber rests:
F:
B: Set the stage piano on the rubber rests properly.
SETUP VARIATIONS
Select
DIMENSIONS
Transportation setting (cardboard packaging)
TECHNICAL DATA
Material
Tubes, struts: Steel, powder coated black
Screws, nuts, bolts: Galvanized, nickel plated
Mesh teeth joint: Zinc die-cast, powder coated black
End caps, rubber rests/top:TPE, shore 59A
Excenter clamp lever, POM, black
Load
max. 50 kg
Dimensions
Example: Height 590 x width 790 mm
Support tubes: ø 30 x 250 mm; Base tubes: ø 30 x 500 mm
Packaging
Box: 1015 x 520 x 105 mm
Weight
5.6 kg
Accessories
Carrying Case 18959-000-00
NOT OK:
Overlaps too much
NOT OK:
does not overlap
enough
NOT OK:
Not centered
OK:
Overlap
adequate
OK:
Overlap
adequate
OK:
Centered
NOT OK:
Overlaps too much
NOT OK:
Overlaps too much
OK:
Centered
OK:
- centered
- adequate
-
overlap
NOT OK:
- does not
-
overlap enough
-
overlaps too much
- not centered
TIPS on how to secure the keyboard
