KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
26250-300-55/26250-500-55 Rev.06 03-80-214-00 4/14
SAFETY NOTES
- Designed to hold microphones - is not designed for other loads (weights)
- Handle the circular base
1
carefully, do not drop the circular base
- Please inspect the threads for damage prior to use;
- Protect the threads from impact (among others)
- Screw the base tube
2
into the circular base
1
as far as it will go.
- DO NOT APPLY FORCE when adjusting the height of the extension tube
- When transporting the system hold onto the base tube of the stand,
-
do not hold onto the extension tube
- Be sure that the surface is suitable and level
- Protect against the elements: Moisture, weather, impact
A. ASSEMBLY
- Place the base
1
on the floor, line up the thread of the tube
-
combination
2
as straight as possible and screw it in by hand as
-
far as it will go.
B. HEIGHT ADJUSTMENT
Press the clutch
3
, hold and extend
4
until the
desired height of the base tube
5
has been reached.
As soon as the desired height has been reached - just let go of the clutch
3
.
C. ATTACH
C.
the microphone clamp / boom arm
6
First screw on the knurled washer (3/8", 5/8") onto
6
the stand’s threaded bolt as far as it will go
7
Next screw the microphone clamp or the boom
7
arm onto the threaded bolt.
8
Loosen the knurled washer a bit and re-tighten the
8
microphone clamp or the boom arm.
Disassembly is performed in the reverse order.
D. USE OF THE BOOM ARM
Round base stands are typically solo stands, they can,
of course, be equipped with a boom arm.
NOTE:
Load bearing weight and listing angel are dependent upon:
a. Base circumference of the microphone stand (here: 278 mm)
b. Distance of the load bearing weight (=Microphone) from the central stand tube
c. Carrying load of the swivel arm joint (properly tighten the clamp)
TIP:
- Compared to the three-legged stands, round base stands have a
-
smaller base circumference. This is why we recommend the use
-
of short boom arms, e.g. Model 21140 or 21160.
- First check the compatability of the swivel arm with the microphone.
- Keep the tube combination clean and dry.
- Dirt and liquid in the base tube can have a breaking effect on the
-
extension tubes!
- To care for the product use a damp cloth and a non-abrasive
-
cleaning agent.
USAGE NOTES
TECHNICAL DATA / SPECIFICATIONS
CHECK, MAINTENANCE, CLEANING
Material
Base/Cover: Steel galvanized/PA-black
Tubes: Aluminum anodized, black
Plastic Parts: PA, POM, PC, TPE
Load capacity
Microphone
Dimensions
Base ø 278 mm, height 1055-1750 mm, 3/8" or 5/8"
Box
W x D x H: 380 x 50 x 1000 mm; 3,4 kg
Weight
3,0 kg
Accessories
(optional)
Microphone clip 85040/50/55/60, Popkiller 23956/66
Microphone bar 23550, 236 etc.
Thank you for choosing this product.
The instructions provide directions to all of the important set up and handling steps.
We recommend you keep these instructions for future reference.
26250 One-Hand Microphone
Stand »Performance«
Harmonious in every respect: Design, Handling, Reliability.
- New larger circular base for stability all the while weighing less -
-
thanks to innovative materials (steel core with a tasteful plastic
-
covering)
- A circular rubber insert ring on the base protects the floor
-
(e.g. wood floors) it also reduces unwanted vibrations and foot traffic
-
noise, even when the stand is placed in extreme positions.
- Stable tube combinations that can be adjusted gently, comfortably
-
and silently - with the one-hand clutch
- With connection threads to attach microphones,
-
microphone clamps or boom arms:
-
3/8" = Art.-No.: 26250-300-55
-
5/8" = Art.-No.: 26250-500-55
A. ASSEMBLY
B. HEIGHT ADJUSTMENT
C. ATTACH
D. USE OF THE
D.
BOOM ARM
Carrying load
of the joint
