14330 Saxophone stand »Jazz«
- practical, easy-to-use and sturdy
- stable and yet very light weight thanks to its aluminum profiles
- a large knurled screw serves as the central operating element
- the instrument is protected by a rubber coating
- fitted end caps
- particularly suited for musicians that are on the road a lot: the »Jazz« stand is small and collapsible and can be
-
transported in the velour bag it comes with and fits nicely in the bell of the instrument - making it easy to transport
SAFETY NOTES
SETUP INSTRUCTIONS
Thank you for choosing this product. The instructions provide directions to all of the important setup and handling steps. We
recommend you keep these instructions for future reference.
- Carefully place the instrument in the support arms and place it on the lower rubberized cap
- Be sure that the surface is suitable and level
- The fact that the product is collapsible and its width is adjustable bears the risk of pinching or wedging one's hands and/or fingers;
-
careful and attentive handling during setup, operation and disassembly is indispensable.
- the floor caps are made of high quality material and to the extent technically possible free of softening agents; for the protection of
-
very delicate floors (possibly certain wood floor types) a slip resistant pad should be used, if needed.
A
Take the Jazz
stand out of
the velour bag.
B
Turn the knurled
screw upwards
(=direction OPEN).
C
Extend the three
rectangular profiles
out as far as they
will go.
D
Tighten the
knurled screw
(=direction CLOSE).
