TECHNICAL DATA
MAINTENANCE, CLEANING
FAULT-FINDING (F) and REPAIR (R)
- In the event of workstation maintenance pay
attention to possible risks (e.g. pinching of fingers).
- To care for the product use a damp cloth and a
-
non-abrasive cleaning agent.
Material
Bar: Steel, powder coating
Stand components: PA6, black
Cushioning: Felt, black
Load
Guitars, Bass guitars
Dimensions W x D x H: 505 x 440 x 750 mm
Packaging
W x D x H: 505 x 86 x 790 mm
Box
W x D x H: 530 x 95 x 820 mm
Weight
1.1 kg
F: Stand is not stable
F:
R: Check the floor, make sure everything
F: R:
is clicked into place
2.
F: Lock is not secure
F:
R: Check the screw and spring
4.e
3. PLACING THE CORPUS OF THE GUITAR
4. GUITAR NECK SUPPORT ARMS
5. PLACEMENT OF THE GUITAR
USAGE NOTES / FUNCTION
3. PLACING THE CORPUS OF THE GUITAR
»Carlos« is equally suited for ACOUSTIC
and E-Guitars. The »Carlos« support has
a recess and offers safe and secure
hold for both guitar types:
3.a
E-Guitars are set into a recessed area
on the support. The front guard protects
against the guitar turning inadvertently.
3.b
Acoustic guitars use the entire
recessed area. The front guard
ensures that the guitar does not
turn inadvertently.
4. GUITAR NECK SUPPORT ARMS
This meets two functions:
4.a
A fixed and single U-support ensures
a safe and secure hold of the guitar neck.
4.b
Movable lock on both sides of the
neck support ensures that the
guitar does not inadvertently fall:
1. Lead instrument to bracket.
2. Push the neck lock now...
2.
...lead guitar neck through the mouth...
2.
...and lean against the rear bracket.
3. Release the neck lock and snap it in place
4.c
The lock protects the guitar
from falling out of the stand.
4.d
The guitar can only be removed
if the lock is consciously unlocked.
4.e
The lock function is based on pressure
springs and rotary axes (Phillips screws)
Please routinely check to ensure that guitar
is safe and secure.
5. PLACEMENT OF THE GUITAR
The safest and most protective manner to
store the instrument is to first place it on
the felt covered cushioned support arm
5.a
and then rest it on back of the stand
5.b
.
6. DIMENSIONS
