24624 Lighting stand
- Attractive stand thanks to its elegant design for tight spaces
- Load bearing weight up to 18 kg (max)
- Height adjustable stand tube combination (with locking pin and clamp screw)
- Heavy base plate made of steel, comfortable handle, large plug opening and
-
4 feet covered in felt.
- Hight min. 1400 / max. 2400 mm; Extension: ø 35 mm,
-
M10-Threaded Bolt; Base 550 x 550 mm, Weight: 18 kg
SAFETY NOTES
A. GENERAL
A.
- Load bearing weight: max 18 kg
A.
- Assembly and handling only by qualified technicians
A.
- Wear protective gloves during assembly
A.
- Only to be used indoors
A.
- Be sure that the surface will bear the load and is suitable and level
A.
- ATTENTION! The base plate is very heaving and improper use
A.
-
can result in risk to individuals and objects.
A.
-
NOTE: in particular during assembly do not drop - this can result in the
A.
-
crushing of limbs
A.
- Base plate and tube combination must be screwed in as far as it goes
B. SETUP, OPERATION, DISASSEMBLY
B.
SETUP The screw connection between the stand tube and
B.
the base plate must be screwed in as far as it will go
B.
OPERATION: The weight on the tube combination must be centered:
B.
- if the weight is not centered - this has a negative affect on stability
B.
- Locking pin
17
must be locked into place
B.
-
and the clamping screw
19
must be tightened
B.
- Never loosen the locking pin and the clamp screw without having
B.
-
someone hold the weight objects on the stand
B.
DISASSEMBLY: first remove the objects from the extension tube
B.
then unscrew the the stand tube from the base plate
C. LATERAL FORCES
C.
- Lateral forces are to be avoided due to the risk of it falling over.
C.
-
This includes:
C.
-
a. the load bearing weight is not centered
C.
-
b. bumps, brushing into, vibration, wind, uneven surface
C.
-
NOTE: Maintain safety distance, keep unauthorized persons away
C.
-
Should the effectiveness of the measures not be guaranteed, (e.g. by not
C.
-
keeping the safety distance and the safety distance cannot be guaranteed)
C.
-
the technicians should secure the object with the following additional steps:
C.
- Anchor the base plate to the floor
C.
- suitable extension/expansion/weighting down of the base plate
SET UP INSTRUCTIONS
1
Base plate with feet are to be placed feet down in the desired position.
2
Screw the clamp screw into clamping bracket
3
Threaded connector -M20 of the tube combination is to be
3
screwed into the baseplate as far as it will go.
3.a
Ensure that a space is not left between the tube and the plate
3.a
NOTE: Regularly check and tighten the screws, if needed.
USAGE NOTES / FUNCTION
DIRECTION of the TUBE COMBINATION
- After the tube combination has been screwed in as far as it will go,
-
the operation elements could point in an undesired direction.
-
This can be corrected.
- We recommend that two people are used for this: one person holds the plate
-
and the other person holds the tube
4
The counter nuts on the underside of the plate are loosened with an allen wrench
5
The tube is moved back and forth a bit, so that the female threaded bolt can be
5
removed from the plate
6
Now turn the tube in the desired direction and feed the female threaded bolt
6
into the plate
7
Place the counter nuts in the proper position and tighten them with the allen wrench
HANDLE
8
The comfortable handle protects your hands and makes transport
8
and installation of the base plate easier and much safer.
FEET
To protect the floor the base plate has four screw-in feet that are covered in felt.
9
Loose feet must be tighten with a socket wrench (SW8 = M5).
CABLE / PLUG OPENING
10
Attractive appearance: Cable are laid underneath the base plate.
11
Technically on the safe side: the opening provides room for all standard plug
11
types and the plastic ring protects the cables against sharp edges.
Thank you for choosing this product. The instructions provide directions to all of
the important set up and handling steps. We recommend you keep these
instructions for future reference.
SET UP INSTRUCTIONS
DIRECTION of the TUBE COMBINATION
HANDLE
FEET
CABLE / PLUG OPENING
