STEP 2:
Remove safety pin and lift up the lever on
telescoping collar, adjust center tube to get ideal
height, push down lever for locking, insert safety pin
to a hold on the center tube nearest to the collar.
Service:
- Clean the stand from time to time with a cottony cloth.
- Do not use abradant or lubricant to clean the rod combination.
Safety Instructions:
- Do only load up a monitor on the stand if the legs are completely set up.
- The stand can break if the stand with the box is in motion.
- The saftey pin has to be installed.
- Always move the extention rod, without weight, carefully downward.
- Handle the stand with care- wedging elements, rods and fittings can be damaged.
- Clemency of treatment boosts the life span of the stand.
Speaker Stand 21450
User’s Guide
- Easy to adjust lever locking system
- No tools required for installation
- Strong collars secure safety
- Hold up to 100 lbs. under proper installation
- Safty pin to avoid any accidental drop
- Tube end diameter 35 mm
- With Adapter diameter 38 mm (1-1/2”)
SET UP
STEP 1:
Lift up the lever on the base to spread legs to the
maximum diameter, then push down the lever for locking.
STEP 3:
Put on speaker by selecting right size of socket
adapter.
STEP 4:
Reverse to fold the stand in compact size.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
21450-000-55 Rev.02 6/12
