FAULT-FINDING (F) and REPAIR (R)
F: The base plate rocks back R: Check if the surface is even
F:
and forth on the floor: R: Check the base plate (plate/subwoofer) to
R:
ensure that it is on an even surface
R: Are the felt protectors installed?
F: Distance rod is not stable/leaning R: Check the M20 connector is tight, screw it
F:
to one side:
R:
into the tube combination as far as it will go
5
R: Check to ensure the tube combination is straight
R: Ensure that the surface is even
R: Ratio between the subwoofer and satellite okay?
F: Distance rod is not stable/retracts: R: Tighten the locking screw
9
R: Check whether the pushbutton
8
is locked
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
21339-000-55 Rev.10 03-80-871-00 6/16
PLACEMENT and EXTENSION of the SPEAKER
NOTE!
The crank system is used for easy extension and retraction of the speakers (load).
However, do not underestimate the weight of the speaker, which must be placed on the stand tube, i.e.: knowledgeable and physically fit individuals are
needed, depending on the load weight – this can require 2 - 3 individuals.
CHECK, MAINTENANCE, CLEANING
MOVING THE WEIGHT
In contrast to other
stands one individual is
able to move the
speaker to the desired height
easily using the
crank system.
SEQUENCE WHEN EXTENDING
AND RETRACTINGTHE
SPEAKERS
6
Loosen the
locking screw
7
Turn the crank and keep
the button pushed while
turning the crank handle
8
As soon as the desired
height has been reached
release the button and
and let it click into place
- in some cases a half of
a turn of the crank is still
required
9
Tighten the locking
screw
Application Examples (not included in the delivery)
- Careful use of the distance rod maintains the ability to
-
extend and retract the rod, the load bearing functionality
-
of the installation, as well as the safety of the installation
- Only perform workstation maintenance if the equipment
-
has been removed from the support arms and be aware
-
of any eventual risks (pinched fingers, bumping into the
-
equipment, the rod falls over)
- To care for the product use a damp cloth and a
-
non-abrasive cleaning agent
