19780 Adjustable stand adapter
- holder for the mounting of loudspeakers and column speakers that are NOT equipped with a flange adapter
- suitable for stand and wall mounts with tube diameters of 35 mm
-
(e.g. K&M-Stands 21435/36/37/38/50/55/60/94 or K&M-Wall Mounts 24100/10/20)
- flexible and easily adjustable:
-
- angles from 0 - 30°
-
- hight adjustable depending on the dimensions of the stand extension
-
- variable adjustment
- fast and easy assembly
- load bearing weight max. 15 kg
SAFETY NOTES
MOUNTING INSTRUCTIONS
Thank you for choosing this product.
The instructions provide directions to all of the important set up and handling
steps. We recommend you keep these instructions for future reference.
The holder comes completely pre-assembled.
Attaching the part is easy - the prerequisite is, however, that
a suitable stand or mount is used
(see above SAFETY NOTES)
MOUNTING to the STAND/HOLDER
1
Loosen the finger screw to the point that...
2
...the tube can be placed over the stand extension or the
2
mount bolt.
3
Tighten the finger screw to secure the position of the
3
adapter.
- max weight 15 kg
- the stand or wall mount must be able to carry the weight of the stand
-
adapter, this applies to the load bearing weight and the sturdiness of the
-
stand (large enough area for the legs) considering the weight is centered
- be sure that the surface is suitable and level
- after assembly/mounting ensure that the screw connections between the
-
box, adapter and stand/mount are properly tightened and repeat this step
-
regularly
MOUNTING THE LOUDSPEAKER
4
Separate the swivel support arm
from the adapter:
a. loosen the lower screw completely
b. remove the swivel support arm
b.
from the adapter
6
Swivel support arm (with the
mounted loudspeaker) are
placed into the adapter
7
Secure the swivel support arm
with the carriage bolt, U disks and
nuts
5
Screw the loudspeaker to
the swivel support arm
(screws are not included
due to the different sizes)
