background image

19745 Smartphone Holder

INSTALLATION (A-F)

Continuation

F

REMOVING THE SMARTPHONE FROM THE CRADLE 

F

11

Hold the smartphone at the top... 

F

12

...with the other hand press the sliders so that the side 

F 12

bars part and...

F

13

...the smartphone can be removed.

G

STAND:

- Tube diameter 7-30 mm

H

LARGE SMARTPHONES: 

- Width: 46-76 mm
- Height: check suitability above 150 mm 

I

DIRECTION:                  

- 360° around the clamp on the tube

J

TILT (see Fig.):              

- The flexible arm can be "bent" through 90°.

-

Apply gentle strength.                                   

-

We recommend: bending the arm upwards for a good 

- We recommend:

reading angle

-

We do not recommend: bending the arm sideways as this is 

- We do not recommend:

better attained by re-adjusting the 

- We do not recommend:

clamp.

-

We warn against: bending the arm downwards as the 

- We warn against:

smartphone may fall from the holder                      

K

FORMAT (see Fig.):

K

Portrait (vertical) - Landscape (horizontal)

K

- The arm is connected to the cradle and u clamp in two ways:

K

-

a. per screw mechanism

K

-

b. per square plug connection

K

14

Switching from portrait to landscape format and back 

K 14

functions as follows.

K 14

c

Loosen and remove the arm union nut (it doesn‘t matter

K 14 c

which one of the two)

K 14

d

Remove the arm

K 14

e

Turn the arm through 90° and insert the cone in the 

K 14 e

square plug of the threaded connection

K 14

f

Re-tighten the union nut

FAULT FINDING (F) and SOLUTION (S)
F: Smartphone wobbles

F: 

S: Check the side bars are tight and if necessary  

F: S:

correct (

E 10

)

F: Smartphone cradle wobbles      

F: 

S: Check the screw connections and if necessary 

F: S:

tighten (

K 14

)

F: 

S: Locking mechanism not right? 

F: S:

Repeat positioning procedure for the cradle and ensure it 

F: S:

is correctly locked in place (

C

)

FUNCTIONS & ADJUSTMENT (G-K)

F

G

H

I

J

K

Materials

Clamp, knurled screw: steel 
cradle, holding plate, screw nuts: PC-ABS
arm: aluminium bar internally, plastic externally
knurled handle, tappet: PA

Load

Smartphones, MP3 players,
div. devices (pay attention to size)

TECHNICAL DATA

KÖNIG & MEYER

GmbH & Co. KG 

Kiesweg 2, 97877 Wertheim, www.k-m.de

19745-000-55  Rev.03  03-80-193-00  11/12

Dimensions

Width of device: 46-76 mm
for tubes: ø 7-30 mm

Carton

155 x 50 x190 mm

Weight

net: 0,18 kg,
gross: 0,26 kg

Отзывы: