USAGE NOTES / FUNCTIONS
CHECK, MAINTENANCE, CLEANING
- In the event of workstation maintenance pay attention to possible risks
-
(bumped, pinched, wedged).
- To care for the product use a damp cloth and a non-abrasive cleaning agent.
FAULT-FINDING (F) and REPAIR (R)
F: Stand is not stable:
F:
R: Adjust balance end caps, check surface.
F: Height/width of the stand does not fit:
F:
R: Select a different angle.
F: Keyboard is not firmly placed on the stand (unstable):
F:
R: Check the bottom of the keyboard for uneven surfaces, adjust the width of
F: R:
the stand.
F: The keyboard is not placed on the rubber base:
F:
R: Adjust the back rubber rings to the proper position.
SETUP VARIATIONS
Select
DIMENSIONS
Transportation setting - (cardboard packaging)
ADJUST BASES
The distances between the rubber bases can
be adjusted to the dimensions of the instrument.
Just push the black rubber bases to the front until
the correct distance has been selected.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
18933-070-55 Rev.04 03-80-246-00 4/13
TECHNICAL DATA / SPECIFICATIONS
Materials
Steel tubes and steel struts: powder coated, black
Screws, nuts, bolts: galvanized, nickel plated
End caps, rubber base/top: TPE, Shore 59A black
Excenter clamp lever: POM, black
Load capacity
max. 50 kg
Dimensions
Example: height 805 mm x width 585 mm
Top tube: ø 30 x 250 mm; base tube: ø 30 x 500 mm
protective rubber top ø 37 mm
Packaging
Box: 1015 x 520 x 95 mm
Weight
3.8 kg
Accessories
18941-000-55 Stacker
Keyboard “lage”
Keyboard “small”
