KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
18868-000-55 Rev.05 / 18868-000-81 Rev.06 03-80-124-00 6/16
SAFETY NOTES
- For correct attachment to the »Spider Pro«
-
please note the assembly instructions.
- Also note the safety notes from the assembly
-
instructions of the »Spider Pro«.
- Position the laptop close to the front stop.
- Both arms must have the same inclination.
SET-UP
- First, prepare the cover plate of the »Spider Pro«:
-
- for this purpose unscrew the five screws
1
,
-
- remove cover plate
2
and detach threaded bolt
3
.
- Insert steel plate
4
into cover plate
2
and screw-on
5
-
both parts again with the »Spider Pro«.
- Screw the laptop rest on the cover plate by using
-
clamping screw M8
7
and interposed washer.
- Glue the four rubber pads
6
at the corresponding
-
points of the support tube.
Disassembly is performed in reverse order.
ADJUSTING THE ANGLE
DIMENSIONS
18868 Laptop rest
- suitable for 18860 »Spider Pro« and 18840 »Baby Spider Pro«
- stable, flexible and practical
- tiltable in four positions
- load capacity: max. 8 kg
Thank you for choosing this product. This instruction
manual informs you about the important steps to set up
and handle the products. We recommend to keep the
manual in a separate place for a possible later use.
Material
Tubes: steel, black powder coating
Caps, grips, feet: PA, PE, TPE
Threads, bolts, struts: steel, galvanized, nickel plated
Load
Laptops, Notebooks
Rest
Width: 565 mm, Depth: 310 mm
Pack size, kg
W x D x H: 275 x 325 x 150 mm; 1.3 kg
Box, kg
W x D x H: 360 x 330 x 160 mm; 1.9 kg
A. Angle - even, 9°, 17° and 25°
B.1 Lift up the support arm until
B.1
the bolt clicks into the
B.1
vertical slot.
B.2 Place the bolt into the
B.2
desired vertical slot.
B.3 Place the second
B.3
support arm in the
B.3
same position.
TECHNICAL DATA
