- In the event of workstation maintenance pay attention to possible risks
-
(wedging, knocking over)
- To care for the product use a damp cloth and a non-abrasive cleaning agent.
FAULT-FINDING (F) and REPAIR (R)
F: Stand is not stable
F:
R: Check the floor, are the feet in the proper position and check that the stand is
F: R:
sturdy and if needed make the appropriate adjustments, i.e. set up the foot
F: R:
tube at a 90° angle and tighten the screw
F: Height of the stand needs to be adjusted
F:
R: Adjust the extension tube (3 possible height settings, see
A
.)
F: Holder is not stable
F:
R: Check if the locking pin has clicked into position and tighten the clamping screw
10
USAGE NOTES / FUNCTION
CHECK, MAINTENANCE, CLEANING
A. HEIGHT of the SUPPORT ARMS - 3 SETTINGS
A.
- Loosen the finger screw
5
,
A.
- Pull the extension tube
6
upwards until the
A. -
locking pin clicks into the drill hole
7
.
A.
- If the setting height needs to be adjusted,
A.-
press the locking pin
8
and
A.-
adjust the extension tube.
A.
- After adjusting to one of the three possible
A.-
heights
9
re-tighten the finger screw
10
.
B. POSTION of the INSTRUMENT BODY CUSHION 11
B.
- variable adjustment
B.
- The cushion is adjusted, so that the desired
B.
-
height is attained and this position is maintained.
C. POSITIONING the Support Arms
C.
- the support arms are adjustable and automatically
C.
-
adjust to the headstock of the guitar.
D. PLACEMENT OF THE INSTRUMENT 12
D.
- Place the neck of the guitar into the support arms,
D.
-
then carefully lean the guitar against
D.
-
the cushioning.
D.
- is also suited for E-guitars and
D.
-
acoustic guitars.
E. DIMENSIONS
F. ASSEMBLY
F.
- Loosen the clamping screw
10
F.
- Press the locking pin
8
- if needed several times,
F.
-
until the extension tubes retract completely
F.
- Re-tighten the clamping screw
10
F.
- retract the legs (refer to setup instructions)
ADJUSTMENTS
TECHNICAL DATA
Material
Tubes, sheet metal parts, screws - Steel, black
Handles, guides - Polyamide (PA), black
End caps - TPE, Black
Support arm cushioning - TPE, translucent
Cushioning - PU-foam material, gray
Dimensions
Overall height: 1035 - 1110 - 1185 mm
Setup Dimensions: W x D 690 x 355 mm
Packaging
Box, W x H x D: 940 x 85 x 680 mm
Weight
5.0 kg
