16280 Guitar Wall Mount
-This wall mount fits for many guitar designs, but some special types may not work. Please check before use.
-Each of both brackets is twistable on its own (Fig.4).
-Even asymmetric guitars could be fitted, provided that there is a swelling on the guitar head (Fig.4).
-The guitars weight provides a self-locking effect by the brackets.
-Both brackets are covered with non-marring rubber by vulcanised rubber.
-W x D x H: 93 x 66 x 138mm, weight: 0.2 kg.
INSTRUCTION MANUAL
2. WALL MOUNT OPTIONS
1.a
Adjust wall plate vertically,
mark drilling holes
1.b
Drill anchor holes (2x)
diameter 6 mm
concrete wall / perforated bricks (Fig.)
e.g.:
-expansion anchor 6 x 50 mm with
-slotted pan head screw 5 x 70 mm
-drill, countersink and blow out hole,
-
place anchor and bracket, fix slotted
-
pan head screw
1. WALL BRACKET FASTENING
3. DIMENSIONS
4. SETTINGS
Put guitar in the wall
mount and set up the
two brackets. Release
guitar carefully and
check for a safe fit.
SAFETY INSTRUCTIONS
-Caution: function safety depends on the guitar design (corpus depth, guitar-head-
-
form) and requires careful guitar placement.
-Choose a position and mounting method compliant with local building codes and
-
regulations
-For use only at proper walls with adequate anchors (see 2.; not included in delivery)
-Not suitable for fragile walls. Beware of power supply lines and water conduits. In
-
case ask an expert.
-Inspect bolted assemblies regularly
-For indoor use only
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2a, 97877 Wertheim, www.k-m.de
16280-000-55 Rev.01 03-80-148-00 10/06
