KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
16075-000-42/56/87 Rev.04/03/03 03-79-136-00 11/21
TECHNICAL DATA
USAGE INSTRUCTIONS
16075 Headphones table stand
- Your headphones: always in their designated spot, always within reach and they
-
always take center stage
- Stylish with an understated form - not uncool.
- This top shelf Headphone Table Stand is equally suited for Home and Studio
- The material mix offers true quality:
-
- the plastic support arm protects and secures the headphones
-
- the steel stand combines resilience and a streamline silhouette
-
- flat inconspicuous rubber pads provide for slip-resistance
-
- semi-matt surface in sand-beige, black or gray
SAFETY NOTES
Thank you for choosing this product. The instructions provide directions
to all of the important set up and handling steps. We recommend you
keep these instructions for future reference.
1. PREPARATION
The table consists of the base and the headphone
support, and comes pre-assembled - and as such -
almost ready to use.
1.a
All you have to do is adhere the 4 rubber pads
1.a
on the bottom of the table stand base.
1.b
We recommend that you put them
1.b
far apart and on the corners.
2. SETUP
Now place the table stand on a table, shelf or any
other desired spot.
3. PLACEMENT OF THE HEADPHONES
3.a
Take the headband of the headphones and hang
3.a
it on the plastic support arm.
3.b
If the headphone has a cable, it can be rapped
3.b
around the stand.
3.b
We recommend that the cable is not wrapped
3.b
tightly.
4. DIMENSIONS
The dimensions also provide for the hanging
of very large headphones.
- The table stand is designed solely for headphones
-
and headphone cables. Other equipment, particularly
-
those that are only to be placed on the stand are not
-
permitted
- Be sure to place it on a surface that is suitable, level,
-
and large enough
- The rubber pads are made of high quality materials
-
and to the extent possible free of harmful
-
substances. To protect particularly delicate surfaces
-
(e.g. certain wood floors) a slip resistant pad should
-
be used, if needed
- The rubber pads should be placed such that the table
-
stand base stands securely
CLEANING, MAINTENANCE, INSPECTION
- To care for the product, use a damp cloth and a non-abrasive cleaning agent.
- The exchange of the headphone support arm is not expected, but possible.
-
In this case we recommend that the table stand be sent into our repair service.
-
If you choose to fix it yourself, please be sure to take the sharp barbs on the
-
metal tongue into account. This represents a possible risk.
Material
Table base: Steel, structured powder coating,
sand beige, black or gray
Support Arm: Plastic TPE G971 63Sh
Rubber pads: TPE extruded
Load
Head Cable
Dimensions
Table base: H x W x D: 247 x 145 x 147 mm
Support Arm: W x D-inside 101 x 72 mm
Box
150 x 150 x 255 mm
Weight
net. 0.7 kg / gross 0.8 kg
1. PREPARATION
3. PLACEMENT OF THE
3.
HEADPHONES
4. ABMESSUNGEN
View
from below
View
from above
