14160 Stand for electric double bass
- stable, robust and small folding, hence very well suited for mobile use
- flexible support bracket:
-
can be bent up or down; upholstered with protective rubber
- height adjustable; infinitely variable from 920-1620 mm
- assembly and disassembly needs no tools
SAFETY INSTRUCTIONS
- Before placing the instrument in the v-shaped base the
-
endpin has to be extended. Based on experience the
-
distance is 5-8 cm, nevertheless it may be necessary to
-
check each instrument.
- Place the instrument carefully in the base and then lean
-
it against the support bracket.
- Pay attention to a suitable and level flooring.
- The bending of the support bracket requires effort and
-
should be carried out by a suitable person; bending
-
angle: max. +/- 40 mm breadthwise.
- The possibility of folding or adjusting the product
-
conceals trapping hazard; careful and attentive handling
-
during assembly, operation and dismantling is therefore
-
indispensable.
- The parquet protectors are made of high-quality material
-
and are as far as possible free of plasticizers; for the
-
protection of very sensitive floors (in case of particular
-
parquet types) use a non-slip underlay, if necessary.
INSTALLATION INSTRUCTIONS
The setup of the 14160 Stand for electric double bass is
simple. The stand is already pre-assembled and only
needs to be brought into position.
1.
Remove stand from cardboard
2.
Loosen clamping screw
3.
Pull feet apart...
4.
...until connecting stiffener are horizontal
5.
Tighten clamping screw firmly again
6.
Loosen clamping on the span clamp,
6.
extend or retract extension tube.
6.
Retighten clamp.
7.
Folding in reverse order
Thank you for choosing this product. This instruction manual informs you about the important steps to set up and handle the product.
We recommend to keep the manual in a separate place for a possible later use.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14160-000-55 Rev.10 03-80-738-00 12/19
2.
Loosen screw
5.
Tighten
5.
screw
4.
best stability is given with horizontal
4.
position of the cross struts
6.
Height adjustment
6.
for extension tube
3.
Fold feet
3.
downwards
