SAFETY NOTES
ASSEMBLY INSTRUCTIONS
CARE & MAINTENANCE
Check that the following parts are included in the package and undamaged.
1
BASE
2
PNEUMATIC SPRING
3
UPHOLSTERED SEAT
4
Place the base on the floor
5
Insert the thicker end of the pneumatic
5
spring section into the drill hole
6
Place the upholstered seat with the
6
connection piece first onto the upper pin
6
of the pneumatic spring section
7
Press the seat down with your body
7
weight until the parts connect.
7
Check that the parts are secure by
7
briefly lifting the seat.
HEIGHT ADJUSTMENT
- First, sit on the stool.
- Sit with your feet on the ground supporting
-
your bodyweight
8
Push the lever up
9
Use your body position to lower or
9
higher the seat to the required height,
9
release the lever
8
DISMANTLE into 3 parts
- preferably with two persons
10
Turn the stool upside down on
10
the upholstered seat
11
Hold the stool by the base and lift it
11
from the floor
12
Using a rubber hammer, strike the underside
12
of the pneumatic spring so that it releases
12
from the base
13
Again, lift the pneumatic spring slightly and
13
strike the metal plate of the seat with the
13
rubber hammer until the seat releases.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14092-017-55 Rev.07 03-80-181-00 8/18
- The stool is only suitable for use on level, sound ground
- Do not use the stool as a step ladder
- As the product can be dismantled, there is the inherent risk of pinching or trapping and care is required
-
when assembling, using or dismantling
- When transporting the stool hold both the base and the seat
- The high quality floor protector is virtually free of plasticizers, but lay a non-slip mat under the base to avoid leaving marks on
-
sensitive floors (e.g. parquet).
14092 Piano stool
Attractive, flexible and comfortable
- Excellent stability
- Comfortable and durable seat upholstery
- Seat infinitely rotatable - no locking mechanism
- Elegant design
- User-friendly, the pneumatic spring allows continuous
-
height adjustment
- Tour compatible (quick to dismantle into 3 pieces)
- Data: height: 480-610 mm, seat ø 350 x H 120 mm,
-
base ø 400 mm, weight: 6.3 kg
Thank you for choosing this product. These instructions contain information
about the assembly of the product and its use. We suggest you keep the
instructions in a safe place for later use.
- Be aware of the potential risks
-
associated with maintenance and
-
care
- We recommend using a slightly
-
damp cloth and a non-scouring
-
cleaning agent
FAULT FINDING (F) and REPAIR (R)
F: Piano stool wobbles:
F:
R: Check the ground and if
F: R:
necessary correct positioning
F:
R: Check the connections are secure
F: Seat does not move up or down:
F:
R: Person is too light or the lever
F: R:
has not been pushed up far
F: R:
enough
F:
R: Spring is defective (contact
F: R:
customer service)
TECHNICAL DATA
Materials
Base, pneumatic spring: black powder-coated steel
Pneumatic spring casing: PP plastic
Seat: black Skai leather
Dimensions in mm
base: ø400, seat: ø350x120, height: 480-610
Weight / carton
6.4 kg / single carton: LxBxH 500x455x300 mm
480 - 610 mm
