14085/14086 Piano Bench
- practical and very solid seating in an attractive design
- adjustable height: comfortable and quick through the use of catch/clamp elements
- with skai leather (Model 14085) or with fabric upholstery (Model 14086)
- Dimensions: Height min. 430 / max. 670 mm, width 660 mm, depth 330 mm
- Weight: 8.5 kg
SAFETY NOTES
- Tighten the screws
2
,
3
,
8
- Lock the locking pin/bolt
8
- The leg adjustments height for both leg tubes
-
must always be the same.
- Be sure that the surface will bear the load and
-
is suitable and level
- max. height has been reached as soon as the
-
STOP label can be seen on the leg tube
-
See HEIGHT ADJUSTMENT Section
- Adjusting the product bears
-
the risk of pinching fingers. Be careful and
-
attentive during setup and disassembly.
- NOTE:
-
The piano bench is seating furniture, do not use it
-
as a step-stool, this is prohibited for safety reasons!
SET UP INSTRUCTIONS
COMPONENTS
1
Legs (2x)
2
Half-round screw M8 x 35 mm with U-disk ø 8.4 mm (4x)
3
Cylinder screw M6 x 40 mm with U-disk ø 6.4 mm (2x)
4
Caps (4x)
5
Fastening strip (2x)
6
U arms
7
Bench
8
Catch/Clamp Handle M12 (2x)
ASSEMBLY
A.
Screw the U arm
6
to the bench
7
.
A.
- pull the fastening strip
5
through the U arm
6
slots
A. -
and ensure they are centered and fasten them
A. -
using the cylinder screw and U disk
3
.
A.
- Place the caps 4 on the fastening strips
5
.
A.
- Place the half-round screws with a U disk
2
through the caps
A. -
4
and screw it onto the bench
7
B.
- place legs
1
(punch holes are on the outside) in the
B.
-
U arm tube
6
and adjust the height
B.
-
by turning the catch/clamp handle
B.
- NOTE:
B.
-
The pegs of the catch/clamp handle
8
must
B.
-
be placed in the leg tube drill hole
1
before
B.
-
it is tightened.
B.
-The second leg is to be assembled in the same manner.
B.
-
Be sure both leg adjustments are at the same height (Scale).
Thank you for choosing this product.
The instructions provide directions to all of the important
set up and handling steps We recommend you keep these
instructions for future reference.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14085-000-55/14086-00-55 Rev.015 03-80-148-00 1/18
