KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
12185-000-55 Rev.05 03-79-102-00 1/17
TECHNICAL DATA
SETUP INSTRUCTIONS
12185 Laptop stand
- sturdy and load bearing
- versatile and generously sized music desk with adjustable stops
- handy operation elements for the setting of the stand height
- folding legs for compact transportation
- quick setup and break down without the use of tools
- dimensions: height 700-1250 mm, music desk 482 x 315 x 9 mm, weight: 3.9 kg
SAFETY NOTES
Thank you for choosing this product. The instructions provide directions to the important setup
and handling steps. We recommend you keep these instructions for future reference.
FUNCTIONS
HEIGHT ADJUSTMENT
NOTE:
Prior to loosening the clamp screw
13
hold the extension
tube in one hand.
13
Loosen the clamping screw of the clamp/bracket;
14
adjust the extension tube to the desired height
15
re-tighten the clamp screw.
TRAY
The tray (internal: 479 x 312 mm) is very generous in size
and offers space for laptops of any size. In many cases,
there should also be enough space for other gadgets.
HOLD LAPTOP IN PLACE
- refer to (8-12)
If needed, in addition to the four clamping bolts that come
with the stand, additional clamping bolts can be ordered.
Order-No.: 6-12185-2-55 (1 Clamp bolt).
STAND
1
Loosen the adjustment screw a bit,
2
expand the legs until...
3
...the connecting struts are level.
4
Re-tighten the clamping screw.
4
NOTE: Manual strength is enough; Do not over-tighten
4
the screws it can negatively affect the components.
TRAY
5
Remove the wing nut from the lower plate of the tray,
6
Place the lower plate into the extension tube as far as
6
it will go
7
Tighten the wing nut more or less: so that the tray
7
movement can be set so that it can be moved easily or
7
that it is held tightly in place.
CLAMPING BOLTS (4x)
1
8
Unscrew the clamping bolts
1
9
select the desired slit (refer to the EXAMPLES)
10
connect the clamping bolts
11
center the laptop as best as possible and...
12
...move the clamping bolts in the slit until the rubber caps
12
hold the laptop in place and then tighten the wing nuts
- The floor must be load bearing and even.
- Installation safety:
-
- Center the laptop (weight bearing load)
-
- Pull the legs apart (= horizontal struts)
-
- Ensure that the music desk is firmly placed on the
- -
extension tube as far as it goes: particularly after the
- -
position has been changed.
- The fact that the product is collapsible and adjustable,
-
can result in pinching and wedging of fingers and hands.
-
Careful and attentive handling during setup, operation
-
and disassembly is indispensable.
- NOTE: the use of the clamping bolts (refer to
8
-
12
)
-
ensures that the laptop maintains its position during use.
-
However, the clamping bolts are NEVER to be used to
-
secure anything for transportation or while moving the
-
stand, in particular when the music desk is at an angle.
-
In this case the load bearing weight (laptop, music sheets
-
etc.) must be removed or secured otherwise.
Material
Tubes, struts, tray: Steel
Brackets, handles, lower plate: Polyamid (PA)
End caps, clamp caps: TPE
Load
Laptop, Gadgets
Pack size, weight
700 x 120 x 380 mm; 3.9 kg
Dimensions
Tube Combination: ø 30/25 mm
Height: 700-1250mm (max. base-ø 750 mm)
Tray: internal 479 x 312 x 7,5 mm, t=1,5mm
Accessories
(optional)
Carrying case 11450
Sheet music trays 122a, 12218, 131
Eye glass holder 16050 among others
Magnets 11560, 11580
CLAMPING BOLTS - HOLD LAPTOP IN PLACE
TRAY
STAND
SAMPLE
HEIGHT ADJUSTMENT
