KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
11965-000-55 Rev.04 03-80-673-00 02/18
TECHNICAL DATA
SETUP INSTRUCTIONS
11965 Orchestra Music
Stand with Tablet Holder
- A highly versatile and gifted music stand for home, studio and stage
- thanks to an additional clamp to hold Tablet-PCs - all brands and all sizes
- With comfortable quick release from the music desk
- Solid, robust desk made of steel - perfect for magnets
- Stand: 750-1350 mm, - Desk: 495 x 320 x 50 mm, - Tablet: W. max. 445 mm
SAFETY NOTES
Thank you for choosing this product. The instructions provide directions to all of the important set up and handling
steps. We recommend you keep these instructions for future reference.
FUNCTIONS
ADJUSTING THE HEIGHT OF THE STAND
NOTE: Prior to loosening the clamp screw
always hold the extension tube in one hand.
15
Loosen the clamping screw of the clamp/bracket;
16
Adjust the extension tube to the desired height
17
Re-tighten the clamp screw.
ADJUSTING THE ANGLE OF THE MUSIC DESK
18
Loosen the wing nut,
19
Place the table at the desired angle,
19
-vertical ---- horizontal --- folded
20
Re-tighten the wing nut.
Music Desk 11965 also meets - as is the case with
previous desks - its function of being a reliable desk for
sheet music, manuscripts, books, folders etc.
ATTACH THE TABLET PC - see (8-14)
If needed, in addition to the four clamping bolts that come
with the stand, additional clamping bolts can be ordered.
Article-No.: 6-12185-2-55 (1 unit).
STAND:
1
Loosen the adjustment screw a bit,
2
Expand the legs until...
3
...the connecting struts are level.
4
Re-tighten the clamping screw. NOTE: Manual
4
tightening is all that is needed, do not over-tighten
4
the screws it can negatively affect the components.
MUSIC DESK:
5
Flip up the gray clamp lever,
6
Place the slide bracket all the way...
7
...into the bracket on the stand.
8
Secure the connection by flipping the gray lever down.
CLAMPING BOLTS (4x):
1
8
Unscrew the clamping bolts
1
9
Select the desired slit (refer to the EXAMPLES)
10
Connect the clamping bolts
11
Center the laptop as best as possible and...
12
...place the 4 clamp bolts in the slits...
13
...until the laptop is firmly in place.
14
Tighten the wing nuts to ensure that the laptop is secure.
- The floor must be load bearing and even.
- Items placed on the desk must be centered.
- Tighten the screws - but do not too tight.
- The fact that the product is collapsible and adjustable can
-
result in wedging or pinching of fingers: Careful handling
-
during setup, operation, and disassembly is indispensable.
Material
Tubes, struts, music desk: Steel
powder coated, black
Brackets, handles: Polyamide (PA)
Joint: Polycarbonate (PC)
End caps, clamp caps (TPE)
max. load
sheet music, manuscripts, books, folders
Tablets, Laptops, Gadgets
Dimensions
Rod combination: ø 30/25 mm
max. base circumference ø 750 mm
Height: 750-1350 mm
Music desk: W x H x D - 495 x 320 x 50 mm
Tablet clamp: W. max. 445 mm
Packaging
140 x 100 x 780 mm + 495 x 320 x 50 mm
Weight
4 kg
STAND
HEIGHT
STAND
DESK
ANGLE
MUSIC
DESK
CLAMPING BOLTS (4x)
ATTACH TABLET PC
vertical
horizontal
EXAMPLE
Tablet
Tablet
folded
