KONICS krn100, Руководство пользователя

Страница: 33 / 155

5
Installation
© Copyright Reserved KONICS Co., Ltd. 33
5 Installation
5.1 Installation place
Install this unit in place where the below conditions are satisfied.
 Place where ventilation is well
To prevent from malfunction and damage by overheating (use temperature range: 0 to 50
℃
),
install this unit where ventilation is well.
In case installing several KRN100, space each other by panel cut-out.

Place where vibration is not severe
If there is too much vibration, it may cause malfunction such as print error.
For more information about vibration, please refer to ‘2 Specification’.
 In case of temperature measurement with thermocouple temperature sensor at the place
where temperature is fluctuated, data error may occur. You should warm-up this unit over 30
min. to acquire accurate data before using it.
 At the place where temperature and humidity is fluctuated excessively, recording paper
color may be changed.