KONICS krn100, Руководство пользователя

Страница: 25 / 155

2
Specification
© Copyright Reserved KONICS Co., Ltd. 25
2.3 Input specification and measuring range
Input sensor Mark
Measuring range
℃ ℉
K
Thermocouple
K(CA) TC-K -200.0 to 1350.0 -328.0 to 2462.0 73.2 to 1623.2
J(IC) TC-J -200.0 to 800.0 -328.0 to 1472.0 73.2 to 1073.2
E(CR) TC-E -200.0 to 800.0 -328.0 to 1472.0 73.2 to 1073.2
T(CC) TC-T -200.0 to 400.0 -328.0 to 752.0 73.2 to 673.2
B(PR) TC-B 100.0 to 1800.0 212.0 to 3272.0 373.2 to 2073.2
R(PR) TC-R 0.0 to 1750.0 32.0 to 3182.0 273.2 to 2023.2
S(PR) TC-S 0.0 to 1750.0 32.0 to 3182.0 273.2 to 2023.2
N(NN) TC-N -200.0 to 1300.0 -328.0 to 2372.0 73.2 to 1573.2
C(TT) ※
1
TC-C 0.0 to 2300.0 32.0 to 4172.0 273.2 to 2573.2
G(TT)
※
2
TC-G 0.0 to 2300.0 32.0 to 4172.0 273.2 to 2573.2
L(IC) TC-L -200.0 to 900.0 -328.0 to 1652.0 73.2 to 1173.2
L (Russian type) ※
3
TC-L_R 0.0 to 600.0 32.0 to 1112.0 273.2 to 873.2
U(CC) TC-U -200.0 to 400.0 -328.0 to 752.0 73.2 to 673.2
Platinel Ⅱ TC-P 0.0 to 1350.0 32.0 to 2462.0 273.2 to 1623.2
Resistance
temperature
detector
(RTD)
CU50 Ω CU50 -200.0 to 200.0 -328.0 to 392.0 73.2 to 473.2
CU100 Ω CU100 -200.0 to 200.0 -328.0 to 392.0 73.2 to 473.2
JPT100
Ω
JPT100 -200.0 to 600.0 -328.0 to 1112.0 73.2 to 873.2
DPT50 Ω DPT50 -200.0 to 600.0 -328.0 to 1112.0 73.2 to 873.2
DPT100 Ω DPT100 -200.0 to 850.0 -328.0 to 1562.0 73.2 to 1123.2
Analog
Voltage
-60.00 to 60.00 ㎷ ± 60 ㎷ Resolution:10µV
Depending on decimal point
position setting;
-99999 to 99999
-9999.9 to 9999.9
-999.99 to 999.99
-99.999 to 99.999
-9.9999 to 9.9999
-200.00 to
200.00
㎷
± 200 ㎷ Resolution:10µV
-2.000 to 2.000V ± 2V Resolution: 1mV
1.000 to 5.000V 1 to 5V Resolution: 1mV
-5.000 to 5.000V
±
5V Resolution: 1mV
-1.00 to 10.00V -1V to 10V
Resolution:
10mV
Current
0.00 to 20.00 ㎃ 0 to 20 ㎃ Resolution:10µA
4.00 to 20.00 ㎃ 4 to 20 ㎃ Resolution:10µA
※ 1.
C(TT): Same temperature sensor type as existing W5(TT).
※ 2.
G(TT): Same temperature sensor type as existing W(TT).
※ 3.
Russian type L type temperature sensor is divided from general purpose L type.
To change input specification, set jumper pin of KRN-UI2(Universal input card).
(Please refer to ‘4.2 I/O card.)