background image

39

38

FLASH CANCEL

The flash will not fire in this mode. Use flash cancel
when flash photography is prohibited, natural light is
desired to illuminate the subject, or the subject is
beyond the flash range. The camera-shake warning
may appear in this mode.

Press the flash-mode button until the flash-
cancel indicator appears on the data panel to
set the flash mode.

• The orange flash lamp may blink slowly as a

camera-shake warning. Camera shake is a slight
blurring of the image caused by slight hand motions
during long exposures. To eliminate camera shake,
use the flash or place the camera on a tripod.

In night-portrait mode, the camera balances the flash
and existing light exposure so you can take beautiful
portraits at sunset or at night. The flash will fire with
each exposure regardless of the amount of ambient
light. Red-eye reduction is used with the night-portrait
mode.

Press the flash-mode button until the night-
portrait indicator appears on the data panel to
set the flash mode.

• Warn your subject not to move after the flash burst

as the shutter may still be open for the background
exposure. Because of long exposure times, the use
of a tripod is recommended

NIGHT PORTRAIT

ADVANCED OPERATION

Содержание Zoom I60c


































Отзывы: