USABILITY
The newly developed software RANGE VIEWER allows comfortable scanning operations.
The software, designed specifically for KONICA MINOLTA RANGE7, makes the process
from scanning to data integration quick and easy.
01
User-friendly software with navigation
messages
"RANGE VIEWER" is newly developed 3D data processing
software included as standard. It provides various editing
functions from scanning control of the instrument to align-
ment of measured data and data merging. Easy-to-see icons
and a flexible GUI allow scanning and data editing to be done
seamlessly. The navigation messages which show instructions
or the next step allows beginners to easily and quickly learn
operation.
02
Supports 64-bit editions of Windows®
Vista to allow large-volume data pro-
cessing
RANGE VIEWER supports 64-bit editions of Windows® Vista,
enabling large volumes of data to be processed. It does not
require a dedicated computer but can be operated with a
commercially-available laptop computer*, keeping the mo
-
bility of the RANGE7 intact. It also allows quick data transfer
to optional application software via IPC (Inter Process Com-
munication) without the need to save files.
*
For detailed specifications, refer to the Operating Environment of RANGE VIEWER in
this catalog.
03
Easy operation and high processing
ability for reduced total operation time
The total operation time from the setting of dis
-
tance and angle of view, through scanning, to data
integration is about 35 minutes* to measure Konica
Minolta's standard sample from 30 directions. High
operability and a processing ability of approximately
1 minute/cycle on average has been achieved.
*
Measurement using markers (optional accessory).
Other conditions are according to Konica Minolta
Sensing standards.
①
Attach markers so that
five to ten markers are
displayed on the monitor
screen during measure-
ment.
②
Perform measurement and
check that the markers are
displayed on the monitor
screen.
③
Position is aligned ac-
cording to the automatic
recognition of three or
more matching markers in
overlapped images during
measurements.
④
Results of the measure
-
ment of the entire target
are obtained by repeating
steps
②
and
③
.
Measurement procedure with KONICA MINOLTA RANGE7 (measurement using markers)
WO
RK
FL
OW
Navigation message
P e r s o n a l c o m p u t e r
(commercial product)
